You’re bored with listening to cassettes and only having the capacity to enjoy the radio, while your smart phone is loaded with your favourite music but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car journeys to the fullest… That’s exactly why we’ve written and published this article to help you, because in this article you’re going to find out how to install a car radio on your Volkswagen Tiguan. To achieve this, initially we will discover how to remove the old car radio, then how to install a car radio on Volkswagen Tiguan and to finish, how to connect it.
How to install car radio on Volkswagen Tiguan: Removing the old car stereo
Before we get down to the serious business of how to install a car stereo on your Volkswagen Tiguan, there is one imperative task, take off the audio set you currently have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start dismantling, always remember to remove the negative cable from the battery to prevent any risk of short-circuit or electrocution. Once this is conducted, here are the two techniques determined by the stereo that equips your Volkswagen Tiguan:
- Original car radio:
In cases like this, you’ll have to be patient, in general, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this process will not be enough to remove the old car radio from your Volkswagen Tiguan. In reality, you will need to remove certain parts of the centre console to access the car radio itself. To make this happen, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections. - Aftermarket radio :
In this scenario the operation is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is conducted, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve completed dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Volkswagen Tiguan: Fitting and connecting the car radio
Let’s go to the essential section for you, how to install a car stereo on your Volkswagen Tiguan. Beforehand, spend some time to verify the compatibility of your car and your headunit, and to read the installation recommendations, which may give you specific instructions.
Here are the various actions involved in installing an aftermarket car radio. Firstly, put in place the metal frame provided with your new car radio, this frame has the function of holding your car radio in place on your Volkswagen Tiguan, once installed, remember to press the locking tabs on each side of the frame. Once this step has been done, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Volkswagen Tiguan, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just discovered how to install a car radio on Volkswagen Tiguan, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other concerns, or want to learn more about your car, don’t think twice to visit our page dedicated to it.
To get more tips on the Volkswagen Tiguan, take a look at the Volkswagen Tiguan category.
