You’re uninterested in listening to cassettes and only having the ability to enjoy the radio, while your phone is full of your favourite tracks but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car trips to the fullest… That’s exactly why we’ve made this content page to help you, because in this article you’re going to learn about how to install a car radio on your Volkswagen Routan. To accomplish this, initially we will see how to remove the old car radio, then how to install a car radio on Volkswagen Routan and finally, how to connect it.
How to install car radio on Volkswagen Routan: Removing the old car stereo
Before we begin the serious business of how to install a car stereo on your Volkswagen Routan, there is one fundamental task, remove the audio set you currently have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start dismantling, always remember to remove the negative wire from the battery to avoid any risk of short-circuit or electrocution. Once this is conducted, here are the two options according to the stereo that equips your Volkswagen Routan:
- Original car radio:
In cases like this, you’ll have to be patient, in general, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this process will not be enough to remove the old car radio from your Volkswagen Routan. In reality, you will need to remove certain parts of the centre console to access the car radio itself. To get this done, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections. - Aftermarket radio :
In this situation the process is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is conducted, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve accomplished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Volkswagen Routan: Fitting and connecting the car radio
Let’s go to the most important step for you, how to install a car stereo on your Volkswagen Routan. Ahead of time, take the time to examine the suitability of your car and your headunit, and to read the installation information, which may give you specific recommendations.
Here are the various steps required in installing an aftermarket car radio. First of all, put in place the metal frame provided with your new car radio, this frame has the job of holding your car radio in place on your Volkswagen Routan, once installed, remember to press the locking tabs on each side of the frame. Once this step has been done, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Volkswagen Routan, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adapt it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just learned how to install a car radio on Volkswagen Routan, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other complications, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
If you want more tutorials on the Volkswagen Routan, go to our Volkswagen Routan category.
