You’re uninterested in listening to cassettes and only being able to listent to the radio, while your smartphone is full of your preferred music file but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car trips to the fullest… That’s specifically why we’ve written this content to help you, because in this article you’re going to learn about how to install a car radio on your Volkswagen Polo 8. To accomplish this, first of all we will see how to remove the old car radio, then how to install a car radio on Volkswagen Polo 8 and finally, how to connect it.
How to install car radio on Volkswagen Polo 8: Removing the old car stereo
Before we begin the serious business of how to install a car stereo on your Volkswagen Polo 8, there is one essential task, take away the audio set you currently have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start dismantling, always be sure you remove the negative wire from the battery to avoid any risk of short-circuit or electrocution. Once this is conducted, here are the two techniques depending on the stereo that equips your Volkswagen Polo 8:
- Original car radio:
In cases like this, you’ll have to be persistent, generally, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this operation will not be enough to remove the old car radio from your Volkswagen Polo 8. In reality, you will need to remove certain parts of the centre console to access the car radio itself. To make this happen, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections. - Aftermarket radio :
In this circumstance the method is much easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is conducted, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve completed dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Volkswagen Polo 8: Fitting and connecting the car radio
Let’s go to the most important section for you, how to install a car stereo on your Volkswagen Polo 8. Before you start, take some time to check the suitability of your car and your headunit, and to read the installation instructions, which may give you specific instructions.
Here are the various steps required in installing an aftermarket car radio. Firstly, put in place the metal frame provided with your new car radio, this frame has the role of holding your car radio in place on your Volkswagen Polo 8, once placed, be sure you press the locking tabs on each side of the frame. Once this step has been completed, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Volkswagen Polo 8, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adapt it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just learned how to install a car radio on Volkswagen Polo 8, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other complications, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
To discover more tips on the Volkswagen Polo 8, take a look at the Volkswagen Polo 8 category.
