You’re tired of listening to cassettes and only having the capability to listent to the radio, while your smart phone is loaded with your favourite music but you don’t have a jack or usb port on your car radio, so you can’t enjoy your car trips to the fullest… That’s specifically why we’ve created this content page to help you, because in this article you’re going to find out how to install a car radio on your Volkswagen Polo 4. To make this happen, first of all we will find out how to remove the old car radio, then how to install a car radio on Volkswagen Polo 4 and at last, how to connect it.
How to install car radio on Volkswagen Polo 4: Removing the old car stereo
Before we get down to the serious business of how to install a car stereo on your Volkswagen Polo 4, there is one imperative step, remove the audio set you already have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start dismantling, always don’t forget to remove the negative wire from the battery to prevent any risk of short-circuit or electrocution. Once this is achieved, here are the two techniques determined by the stereo that equips your Volkswagen Polo 4:
- Original car radio:
In this instance, you’ll have to be patient, generally speaking, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this operation will not be enough to remove the old car radio from your Volkswagen Polo 4. In actual fact, you will need to remove certain parts of the centre console to access the car radio itself. To achieve this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections. - Aftermarket radio :
In this scenario the technique is easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is achieved, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve accomplished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Volkswagen Polo 4: Fitting and connecting the car radio
Let’s go to the most important step for you, how to install a car stereo on your Volkswagen Polo 4. Ahead of time, take some time to verify the compatibility of your car and your headunit, and to read the installation instructions, which may give you specific guidelines.
Here are the various guidelines required in installing an aftermarket car radio. Firstly, put in place the metal frame provided with your new car radio, this frame has the task of holding your car radio in place on your Volkswagen Polo 4, once positioned, don’t forget to press the locking tabs on each side of the frame. Once this step has been finished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Volkswagen Polo 4, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adapt it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just learned how to install a car radio on Volkswagen Polo 4, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other complications, or want to learn more about your car, don’t think twice to visit our page dedicated to it.
To discover more tips on the Volkswagen Polo 4, take a look at the Volkswagen Polo 4 category.
