You’re bored with listening to cassettes and only having the capability to enjoy the radio, while your smart phone is loaded with your favourite tracks but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car travels to the fullest… That’s specifically why we’ve created this content page to help you, because right now you’re going to learn about how to install a car radio on your Volkswagen Polo 3. To get this done, initially we will find out how to remove the old car radio, then how to install a car radio on Volkswagen Polo 3 and finally, how to connect it.

install-car-radio-volkswagen-polo-3

How to install car radio on Volkswagen Polo 3: Removing the old car stereo

Before we begin the serious business of how to install a car stereo on your Volkswagen Polo 3, there is one important step, remove the audio set you already have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start dismantling, always remember to remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is done, here are the two methods dependant upon the stereo that equips your Volkswagen Polo 3:

  • Original car radio:
    In cases like this, you’ll have to be patient, generally, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this process will not be enough to remove the old car radio from your Volkswagen Polo 3. In actual fact, you will need to remove certain parts of the centre console to access the car radio itself. To achieve this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections.
  • Aftermarket radio :
    In this situation the procedure is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is done, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve accomplished dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your Volkswagen Polo 3: Fitting and connecting the car radio

Let’s go to the essential part for you, how to install a car stereo on your Volkswagen Polo 3. Beforehand, take some time to check the suitability of your car and your headunit, and to read the installation information, which may give you specific instructions.
Here are the various steps required in installing an aftermarket car radio. Firstly, put in place the metal frame provided with your new car radio, this frame has the job of holding your car radio in place on your Volkswagen Polo 3, once positioned, remember to press the locking tabs on each side of the frame. Once this step has been done, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Volkswagen Polo 3, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just discovered how to install a car radio on Volkswagen Polo 3, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other concerns, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.

In the event that you have any further questions about the Volkswagen Polo 3, do not hesitate to consult our Volkswagen Polo 3 category.