You’re sick and tired of listening to cassettes and only being able to enjoy the radio, while your phone is full of your preferred music file but you don’t have a 3.5mm or usb port on your car radio, so you can’t enjoy your car trips to the fullest… That’s exactly why we’ve written and published this content to help you, because now you’re going to find out how to install a car radio on your Volkswagen Passat . To do this, first of all we will find out how to remove the old car radio, then how to install a car radio on Volkswagen Passat and finally, how to connect it.
How to install car radio on Volkswagen Passat : Removing the old car stereo
Before we start the serious business of how to install a car stereo on your Volkswagen Passat , there is one fundamental step, take away the audio set you currently have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start taking out, always remember to remove the negative wire from the battery to avoid any risk of short-circuit or electrocution. Once this is carried out, here are the two solutions depending on the stereo that equips your Volkswagen Passat :
- Original car radio:
In this instance, you’ll have to be patient, most of the time, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this process will not be enough to remove the old car radio from your Volkswagen Passat . In actual fact, you will need to remove certain auto parts of the centre console to access the car radio itself. To get this done, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections. - Aftermarket radio :
In this circumstance the technique is much easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is carried out, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve ended dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Volkswagen Passat : Fitting and connecting the car radio
Let’s go to the most important part for you, how to install a car stereo on your Volkswagen Passat . Before you start, take some time to examine the suitability of your car and your headunit, and to read the installation information, which may give you specific recommendations.
Here are the various actions involved in installing an aftermarket car radio. Firstly, put in place the metal frame supplied with your new car radio, this frame has the function of holding your car radio in place on your Volkswagen Passat , once placed, remember to press the locking tabs on each side of the frame. Once this step has been done, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Volkswagen Passat , then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Volkswagen Passat , remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t think twice to visit our page dedicated to it.
Whenever you have any further questions about the Volkswagen Passat , do not hesitate to consult our Volkswagen Passat category.
