You’re tired of listening to cassettes and only having the capacity to listent to the radio, while your smartphone is filled with your favourite music but you don’t have a jack or usb port on your car radio, so you can’t enjoy your car trips to the fullest… That’s exactly why we’ve written this article content to help you, because in this article you’re going to learn about how to install a car radio on your Volkswagen Passat 8. To accomplish this, initially we will discover how to remove the old car radio, then how to install a car radio on Volkswagen Passat 8 and at last, how to connect it.

install-car-radio-volkswagen-passat-8

How to install car radio on Volkswagen Passat 8: Removing the old car stereo

Before we start the serious business of how to install a car stereo on your Volkswagen Passat 8, there is one necessary task, take out the audio set you already have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start taking out, always make sure to remove the negative wire from the battery to avoid any risk of short-circuit or electrocution. Once this is done, here are the two techniques according to the stereo that equips your Volkswagen Passat 8:

  • Original car radio:
    In this case, you’ll have to be patient, generally speaking, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this procedure will not be enough to remove the old car radio from your Volkswagen Passat 8. In reality, you will need to remove certain auto parts of the centre console to access the car radio itself. To accomplish this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, make sure to disconnect all the connections.
  • Aftermarket radio :
    In this situation the technique is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is done, make sure to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve concluded dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your Volkswagen Passat 8: Fitting and connecting the car radio

Let’s go to the essential step for you, how to install a car stereo on your Volkswagen Passat 8. Ahead of time, take the time to examine the suitability of your car and your headunit, and to read the installation information, which may give you specific recommendations.
Here are the various steps required in installing an aftermarket car radio. First of all, put in place the metal frame supplied with your new car radio, this frame has the task of holding your car radio in place on your Volkswagen Passat 8, once placed, make sure to press the locking tabs on each side of the frame. Once this step has been finished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Volkswagen Passat 8, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Volkswagen Passat 8, make sure to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other complications, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.

If perhaps you have any additional questions about the Volkswagen Passat 8, do not hesitate to consult our Volkswagen Passat 8 category.