You’re tired of listening to cassettes and only having the capability to enjoy the radio, while your phone is loaded with your preferred music but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car journeys to the fullest… That’s exactly why we’ve created this article to help you, because now you’re going to find out how to install a car radio on your Volkswagen Multivan. To make this happen, initially we will discover how to remove the old car radio, then how to install a car radio on Volkswagen Multivan and at last, how to connect it.
How to install car radio on Volkswagen Multivan: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your Volkswagen Multivan, there is one fundamental task, take away the audio set you already have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start taking out, always remember to remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is completed, here are the two solutions dependent on the stereo that equips your Volkswagen Multivan:
- Original car radio:
In this case, you’ll have to be persistent, generally, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this process will not be enough to remove the old car radio from your Volkswagen Multivan. In truth, you will need to remove certain parts of the centre console to access the car radio itself. To accomplish this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections. - Aftermarket radio :
In this situation the technique is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is completed, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve accomplished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Volkswagen Multivan: Fitting and connecting the car radio
Let’s go to the essential step for you, how to install a car stereo on your Volkswagen Multivan. Beforehand, take the time to examine the suitability of your car and your headunit, and to read the installation instructions, which may give you specific recommendations.
Here are the various guidelines required in installing an aftermarket car radio. To begin with, put in place the metal frame provided with your new car radio, this frame has the function of holding your car radio in place on your Volkswagen Multivan, once positioned, remember to press the locking tabs on each side of the frame. Once this step has been completed, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Volkswagen Multivan, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adapt it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just learned how to install a car radio on Volkswagen Multivan, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other concerns, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
If you wish more guides on the Volkswagen Multivan, go to our Volkswagen Multivan category.
