You’re bored with listening to cassettes and only having the capacity to enjoy the radio, while your smart phone is loaded with your preferred music but you don’t have a jack or usb port on your car radio, so you can’t enjoy your car journeys to the fullest… That’s exactly why we’ve written this article content to help you, because now you’re going to find out how to install a car radio on your Volkswagen Caddy 3. To get this done, first of all we will find out how to remove the old car radio, then how to install a car radio on Volkswagen Caddy 3 and finally, how to connect it.
How to install car radio on Volkswagen Caddy 3: Removing the old car stereo
Before we begin the serious business of how to install a car stereo on your Volkswagen Caddy 3, there is one fundamental step, take off the audio set you already have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start taking out, always make sure to remove the negative cable from the battery to prevent any risk of short-circuit or electrocution. Once this is conducted, here are the two methods according to the stereo that equips your Volkswagen Caddy 3:
- Original car radio:
In this instance, you’ll have to be persistent, in general, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this procedure will not be enough to remove the old car radio from your Volkswagen Caddy 3. Actually, you will need to remove certain parts of the centre console to access the car radio itself. To get this done, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, make sure to disconnect all the connections. - Aftermarket radio :
In this circumstance the procedure is easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is conducted, make sure to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve concluded dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Volkswagen Caddy 3: Fitting and connecting the car radio
Let’s go to the essential step for you, how to install a car stereo on your Volkswagen Caddy 3. Before you start, take some time to check the compatibility of your car and your headunit, and to read the installation instructions, which may give you specific instructions.
Here are the various actions involved in installing an aftermarket car radio. To begin with, put in place the metal frame provided with your new car radio, this frame has the task of holding your car radio in place on your Volkswagen Caddy 3, once installed, make sure to press the locking tabs on each side of the frame. Once this step has been accomplished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Volkswagen Caddy 3, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adapt it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just discovered how to install a car radio on Volkswagen Caddy 3, make sure to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t think twice to visit our page dedicated to it.
If you want more guides on the Volkswagen Caddy 3, go to our Volkswagen Caddy 3 category.
