You’re bored with listening to cassettes and only having the capacity to enjoy the radio, while your smartphone is full of your preferred music file but you don’t have a 3.5mm or usb port on your car radio, so you can’t enjoy your car travels to the fullest… That’s exactly why we’ve posted this article to help you, because right now you’re going to find out how to install a car radio on your Volkswagen Beetle. To accomplish this, first we will discover how to remove the old car radio, then how to install a car radio on Volkswagen Beetle and finally, how to connect it.
How to install car radio on Volkswagen Beetle: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your Volkswagen Beetle, there is one necessary step, take away the audio set you currently have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start dismantling, always remember to remove the negative wire from the battery to prevent any risk of short-circuit or electrocution. Once this is achieved, here are the two options determined by the stereo that equips your Volkswagen Beetle:
- Original car radio:
In this instance, you’ll have to be persistent, most of the time, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this procedure will not be enough to remove the old car radio from your Volkswagen Beetle. In fact, you will need to remove certain parts of the centre console to access the car radio itself. To accomplish this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections. - Aftermarket radio :
In this scenario the technique is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is achieved, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve accomplished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Volkswagen Beetle: Fitting and connecting the car radio
Let’s go to the essential section for you, how to install a car stereo on your Volkswagen Beetle. Ahead of time, take some time to examine the compatibility of your car and your headunit, and to read the installation instructions, which may give you specific guidelines.
Here are the various actions involved in installing an aftermarket car radio. Firstly, put in place the metal frame provided with your new car radio, this frame has the job of holding your car radio in place on your Volkswagen Beetle, once installed, remember to press the locking tabs on each side of the frame. Once this step has been finished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Volkswagen Beetle, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adapt it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just learned how to install a car radio on Volkswagen Beetle, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other trouble, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
Whenever you have any further questions about the Volkswagen Beetle, do not hesitate to consult our Volkswagen Beetle category.
