You’re tired of listening to cassettes and only having the capacity to enjoy the radio, while your phone is loaded with your favourite tracks but you don’t have a 3.5mm or usb port on your car radio, so you can’t enjoy your car travels to the fullest… That’s exactly why we’ve created this article to help you, because right now you’re going to find out how to install a car radio on your Toyota Yaris 2. To achieve this, initially we will discover how to remove the old car radio, then how to install a car radio on Toyota Yaris 2 and finally, how to connect it.
How to install car radio on Toyota Yaris 2: Removing the old car stereo
Before we begin the serious business of how to install a car stereo on your Toyota Yaris 2, there is one necessary step, take away the audio set you currently have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start taking out, always don’t forget to remove the negative wire from the battery to avoid any risk of short-circuit or electrocution. Once this is conducted, here are the two ways determined by the stereo that equips your Toyota Yaris 2:
- Original car radio:
In this case, you’ll have to be persistent, in most cases, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this procedure will not be enough to remove the old car radio from your Toyota Yaris 2. In truth, you will need to remove certain auto parts of the centre console to access the car radio itself. To accomplish this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections. - Aftermarket radio :
In this circumstance the operation is easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is conducted, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve concluded dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Toyota Yaris 2: Fitting and connecting the car radio
Let’s go to the essential part for you, how to install a car stereo on your Toyota Yaris 2. Beforehand, take the time to examine the compatibility of your car and your headunit, and to read the installation information, which may give you specific instructions.
Here are the various actions involved in installing an aftermarket car radio. First of all, put in place the metal frame supplied with your new car radio, this frame has the job of holding your car radio in place on your Toyota Yaris 2, once placed, don’t forget to press the locking tabs on each side of the frame. Once this step has been achieved, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Toyota Yaris 2, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Toyota Yaris 2, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other concerns, or want to learn more about your car, don’t think twice to visit our page dedicated to it.
If you wish more guides on the Toyota Yaris 2, go to our Toyota Yaris 2 category.
