You’re uninterested in listening to cassettes and only having the ability to enjoy the radio, while your smart phone is filled with your preferred tracks but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car travels to the fullest… That’s specifically why we’ve created this content page to help you, because now you’re going to find out how to install a car radio on your Toyota Verso. To accomplish this, initially we will discover how to remove the old car radio, then how to install a car radio on Toyota Verso and to finish, how to connect it.
How to install car radio on Toyota Verso: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your Toyota Verso, there is one imperative task, take out the audio set you already have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start taking out, always don’t forget to remove the negative cable from the battery to prevent any risk of short-circuit or electrocution. Once this is conducted, here are the two options based on the stereo that equips your Toyota Verso:
- Original car radio:
In this instance, you’ll have to be persistent, in most cases, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this process will not be enough to remove the old car radio from your Toyota Verso. In truth, you will need to remove certain auto parts of the centre console to access the car radio itself. To do this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections. - Aftermarket radio :
In this situation the operation is much easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is conducted, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve concluded dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Toyota Verso: Fitting and connecting the car radio
Let’s go to the most important section for you, how to install a car stereo on your Toyota Verso. Beforehand, spend some time to check the suitability of your car and your headunit, and to read the installation instructions, which may give you specific guidelines.
Here are the various guidelines involved in installing an aftermarket car radio. Firstly, put in place the metal frame supplied with your new car radio, this frame has the task of holding your car radio in place on your Toyota Verso, once installed, don’t forget to press the locking tabs on each side of the frame. Once this step has been completed, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Toyota Verso, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just learned how to install a car radio on Toyota Verso, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.
If you have any further questions about the Toyota Verso, do not hesitate to consult our Toyota Verso category.
