You’re tired of listening to cassettes and only having the ability to listent to the radio, while your phone is full of your favourite tracks but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car travels to the fullest… That’s exactly why we’ve created this article content to help you, because in this article you’re going to learn about how to install a car radio on your Toyota Tundra. To get this done, first of all we will discover how to remove the old car radio, then how to install a car radio on Toyota Tundra and to finish, how to connect it.
How to install car radio on Toyota Tundra: Removing the old car stereo
Before we get down to the serious business of how to install a car stereo on your Toyota Tundra, there is one imperative task, take away the audio set you already have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start dismantling, always be sure you remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is achieved, here are the two solutions dependant upon the stereo that equips your Toyota Tundra:
- Original car radio:
In cases like this, you’ll have to be persistent, in general, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this operation will not be enough to remove the old car radio from your Toyota Tundra. In reality, you will need to remove certain parts of the centre console to access the car radio itself. To get this done, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections. - Aftermarket radio :
In this situation the method is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is achieved, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve completed dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Toyota Tundra: Fitting and connecting the car radio
Let’s go to the most important part for you, how to install a car stereo on your Toyota Tundra. Beforehand, take some time to check the compatibility of your car and your headunit, and to read the installation information, which may give you specific recommendations.
Here are the various steps involved in installing an aftermarket car radio. Firstly, put in place the metal frame supplied with your new car radio, this frame has the function of holding your car radio in place on your Toyota Tundra, once placed, be sure you press the locking tabs on each side of the frame. Once this step has been finished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Toyota Tundra, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adapt it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Toyota Tundra, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other concerns, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.
If you have any further questions about the Toyota Tundra, do not hesitate to consult our Toyota Tundra category.
