You’re sick and tired of listening to cassettes and only being able to listent to the radio, while your phone is full of your favourite tracks but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car travels to the fullest… That’s specifically why we’ve written and published this article content to help you, because in this article you’re going to find out how to install a car radio on your Toyota Prius. To accomplish this, first of all we will discover how to remove the old car radio, then how to install a car radio on Toyota Prius and finally, how to connect it.
How to install car radio on Toyota Prius: Removing the old car stereo
Before we begin the serious business of how to install a car stereo on your Toyota Prius, there is one important task, take away the audio set you already have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start taking out, always be sure you remove the negative wire from the battery to avoid any risk of short-circuit or electrocution. Once this is carried out, here are the two ways based on the stereo that equips your Toyota Prius:
- Original car radio:
In this case, you’ll have to be patient, generally, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this process will not be enough to remove the old car radio from your Toyota Prius. In reality, you will need to remove certain parts of the centre console to access the car radio itself. To achieve this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections. - Aftermarket radio :
In this circumstance the method is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is carried out, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve concluded dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Toyota Prius: Fitting and connecting the car radio
Let’s go to the most important step for you, how to install a car stereo on your Toyota Prius. Before you start, spend some time to verify the suitability of your car and your headunit, and to read the installation information, which may give you specific instructions.
Here are the various actions required in installing an aftermarket car radio. First of all, put in place the metal frame provided with your new car radio, this frame has the role of holding your car radio in place on your Toyota Prius, once installed, be sure you press the locking tabs on each side of the frame. Once this step has been achieved, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Toyota Prius, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adapt it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just discovered how to install a car radio on Toyota Prius, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other trouble, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
If perhaps you have any additional questions about the Toyota Prius, do not hesitate to consult our Toyota Prius category.
