You’re bored with listening to cassettes and only being able to listent to the radio, while your smart phone is filled with your favourite music but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car journeys to the fullest… That’s exactly why we’ve written this article content to help you, because in this article you’re going to find out how to install a car radio on your Toyota Prius 2. To achieve this, first of all we will find out how to remove the old car radio, then how to install a car radio on Toyota Prius 2 and finally, how to connect it.
How to install car radio on Toyota Prius 2: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your Toyota Prius 2, there is one essential step, take out the audio set you already have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start taking out, always be sure you remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is conducted, here are the two options dependant upon the stereo that equips your Toyota Prius 2:
- Original car radio:
In this instance, you’ll have to be patient, in most cases, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this procedure will not be enough to remove the old car radio from your Toyota Prius 2. In fact, you will need to remove certain auto parts of the centre console to access the car radio itself. To accomplish this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections. - Aftermarket radio :
In this situation the method is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is conducted, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve completed dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Toyota Prius 2: Fitting and connecting the car radio
Let’s go to the essential part for you, how to install a car stereo on your Toyota Prius 2. Before you start, spend some time to verify the compatibility of your car and your headunit, and to read the installation recommendations, which may give you specific instructions.
Here are the various actions required in installing an aftermarket car radio. First of all, put in place the metal frame provided with your new car radio, this frame has the job of holding your car radio in place on your Toyota Prius 2, once situated, be sure you press the locking tabs on each side of the frame. Once this step has been finished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Toyota Prius 2, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adapt it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just learned how to install a car radio on Toyota Prius 2, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t think twice to visit our page dedicated to it.
If you have any further questions about the Toyota Prius 2, do not hesitate to consult our Toyota Prius 2 category.
