You’re tired of listening to cassettes and only having the ability to listent to the radio, while your smart phone is filled with your favourite music file but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car travels to the fullest… That’s precisely why we’ve written and published this content page to help you, because right now you’re going to find out how to install a car radio on your Toyota Corolla Verso. To do this, first of all we will find out how to remove the old car radio, then how to install a car radio on Toyota Corolla Verso and to finish, how to connect it.

install-car-radio-toyota-corolla-verso

How to install car radio on Toyota Corolla Verso: Removing the old car stereo

Before we get down to the serious business of how to install a car stereo on your Toyota Corolla Verso, there is one fundamental task, take out the audio set you already have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start taking out, always be sure you remove the negative wire from the battery to prevent any risk of short-circuit or electrocution. Once this is achieved, here are the two ways based on the stereo that equips your Toyota Corolla Verso:

  • Original car radio:
    In this instance, you’ll have to be patient, generally, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this process will not be enough to remove the old car radio from your Toyota Corolla Verso. In reality, you will need to remove certain auto parts of the centre console to access the car radio itself. To achieve this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections.
  • Aftermarket radio :
    In this situation the method is easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is achieved, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve accomplished dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your Toyota Corolla Verso: Fitting and connecting the car radio

Let’s go to the most important part for you, how to install a car stereo on your Toyota Corolla Verso. Before you start, take some time to examine the suitability of your car and your headunit, and to read the installation recommendations, which may give you specific instructions.
Here are the various steps involved in installing an aftermarket car radio. To begin with, put in place the metal frame provided with your new car radio, this frame has the job of holding your car radio in place on your Toyota Corolla Verso, once placed, be sure you press the locking tabs on each side of the frame. Once this step has been finished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Toyota Corolla Verso, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just learned how to install a car radio on Toyota Corolla Verso, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other complications, or want to learn more about your car, don’t think twice to visit our page dedicated to it.

If you want more tutorials on the Toyota Corolla Verso, go to our Toyota Corolla Verso category.