You’re bored with listening to cassettes and only having the capacity to enjoy the radio, while your phone is loaded with your favourite music but you don’t have a 3.5mm or usb port on your car radio, so you can’t enjoy your car travels to the fullest… That’s precisely why we’ve written and published this article to help you, because right now you’re going to find out how to install a car radio on your Toyota C HR. To accomplish this, initially we will discover how to remove the old car radio, then how to install a car radio on Toyota C HR and at last, how to connect it.
How to install car radio on Toyota C HR: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your Toyota C HR, there is one essential step, take away the audio set you currently have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start dismantling, always remember to remove the negative wire from the battery to avoid any risk of short-circuit or electrocution. Once this is done, here are the two ways based on the stereo that equips your Toyota C HR:
- Original car radio:
In cases like this, you’ll have to be persistent, in most cases, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this operation will not be enough to remove the old car radio from your Toyota C HR. In fact, you will need to remove certain auto parts of the centre console to access the car radio itself. To accomplish this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections. - Aftermarket radio :
In this situation the operation is much easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is done, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve completed dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Toyota C HR: Fitting and connecting the car radio
Let’s go to the essential part for you, how to install a car stereo on your Toyota C HR. Beforehand, spend some time to check the compatibility of your car and your headunit, and to read the installation recommendations, which may give you specific recommendations.
Here are the various actions involved in installing an aftermarket car radio. Firstly, put in place the metal frame provided with your new car radio, this frame has the job of holding your car radio in place on your Toyota C HR, once positioned, remember to press the locking tabs on each side of the frame. Once this step has been done, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Toyota C HR, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adapt it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just learned how to install a car radio on Toyota C HR, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other concerns, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.
Whenever you have any further questions about the Toyota C HR, do not hesitate to consult our Toyota C HR category.
