You’re tired of listening to cassettes and only being able to enjoy the radio, while your phone is loaded with your favourite tracks but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car travels to the fullest… That’s specifically why we’ve created this article content to help you, because right now you’re going to find out how to install a car radio on your Toyota C-hr. To achieve this, first we will discover how to remove the old car radio, then how to install a car radio on Toyota C-hr and at last, how to connect it.

install-car-radio-toyota-c-hr

How to install car radio on Toyota C-hr: Removing the old car stereo

Before we get down to the serious business of how to install a car stereo on your Toyota C-hr, there is one necessary task, take out the audio set you currently have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start taking out, always don’t forget to remove the negative wire from the battery to prevent any risk of short-circuit or electrocution. Once this is conducted, here are the two ways dependent on the stereo that equips your Toyota C-hr:

  • Original car radio:
    In this instance, you’ll have to be persistent, generally, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this procedure will not be enough to remove the old car radio from your Toyota C-hr. In reality, you will need to remove certain parts of the centre console to access the car radio itself. To accomplish this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections.
  • Aftermarket radio :
    In this circumstance the operation is much easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is conducted, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve concluded dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your Toyota C-hr: Fitting and connecting the car radio

Let’s go to the most important step for you, how to install a car stereo on your Toyota C-hr. Before you start, take the time to examine the compatibility of your car and your headunit, and to read the installation information, which may give you specific recommendations.
Here are the various steps required in installing an aftermarket car radio. To begin with, put in place the metal frame provided with your new car radio, this frame has the task of holding your car radio in place on your Toyota C-hr, once installed, don’t forget to press the locking tabs on each side of the frame. Once this step has been completed, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Toyota C-hr, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adapt it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just discovered how to install a car radio on Toyota C-hr, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t think twice to visit our page dedicated to it.

In the event that you have any additional questions about the Toyota C-hr, do not hesitate to consult our Toyota C-hr category.