You’re sick and tired of listening to cassettes and only having the capacity to listent to the radio, while your phone is full of your preferred tracks but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car journeys to the fullest… That’s precisely why we’ve written and published this article to help you, because right now you’re going to find out how to install a car radio on your Toyota Aygo 2. To achieve this, first we will find out how to remove the old car radio, then how to install a car radio on Toyota Aygo 2 and at last, how to connect it.
How to install car radio on Toyota Aygo 2: Removing the old car stereo
Before we begin the serious business of how to install a car stereo on your Toyota Aygo 2, there is one essential step, take out the audio set you already have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start taking out, always make sure to remove the negative wire from the battery to avoid any risk of short-circuit or electrocution. Once this is done, here are the two ways determined by the stereo that equips your Toyota Aygo 2:
- Original car radio:
In this case, you’ll have to be persistent, in general, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this procedure will not be enough to remove the old car radio from your Toyota Aygo 2. In truth, you will need to remove certain parts of the centre console to access the car radio itself. To get this done, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, make sure to disconnect all the connections. - Aftermarket radio :
In this scenario the process is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is done, make sure to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve concluded dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Toyota Aygo 2: Fitting and connecting the car radio
Let’s go to the most important part for you, how to install a car stereo on your Toyota Aygo 2. Before you start, take the time to verify the suitability of your car and your headunit, and to read the installation recommendations, which may give you specific guidelines.
Here are the various steps required in installing an aftermarket car radio. To begin with, put in place the metal frame provided with your new car radio, this frame has the role of holding your car radio in place on your Toyota Aygo 2, once placed, make sure to press the locking tabs on each side of the frame. Once this step has been accomplished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Toyota Aygo 2, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just discovered how to install a car radio on Toyota Aygo 2, make sure to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other trouble, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
To discover more tips on the Toyota Aygo 2, take a look at the Toyota Aygo 2 category.
