You’re tired of listening to cassettes and only having the capacity to listent to the radio, while your smart phone is loaded with your preferred music file but you don’t have a jack or usb port on your car radio, so you can’t enjoy your car trips to the fullest… That’s specifically why we’ve written and published this article to help you, because right now you’re going to learn about how to install a car radio on your Toyota Avalon. To do this, first we will discover how to remove the old car radio, then how to install a car radio on Toyota Avalon and finally, how to connect it.
How to install car radio on Toyota Avalon: Removing the old car stereo
Before we get down to the serious business of how to install a car stereo on your Toyota Avalon, there is one necessary step, take off the audio set you currently have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start dismantling, always make sure to remove the negative wire from the battery to prevent any risk of short-circuit or electrocution. Once this is done, here are the two techniques according to the stereo that equips your Toyota Avalon:
- Original car radio:
In this case, you’ll have to be patient, generally speaking, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this process will not be enough to remove the old car radio from your Toyota Avalon. Indeed, you will need to remove certain auto parts of the centre console to access the car radio itself. To accomplish this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, make sure to disconnect all the connections. - Aftermarket radio :
In this situation the method is easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is done, make sure to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve concluded dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Toyota Avalon: Fitting and connecting the car radio
Let’s go to the most important step for you, how to install a car stereo on your Toyota Avalon. Before you start, spend some time to verify the compatibility of your car and your headunit, and to read the installation information, which may give you specific guidelines.
Here are the various guidelines required in installing an aftermarket car radio. Firstly, put in place the metal frame supplied with your new car radio, this frame has the role of holding your car radio in place on your Toyota Avalon, once positioned, make sure to press the locking tabs on each side of the frame. Once this step has been finished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Toyota Avalon, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Toyota Avalon, make sure to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other trouble, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
If you have any further questions about the Toyota Avalon, do not hesitate to consult our Toyota Avalon category.
