You’re uninterested in listening to cassettes and only having the capacity to listent to the radio, while your smart phone is loaded with your favourite music file but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car travels to the fullest… That’s specifically why we’ve posted this article to help you, because now you’re going to find out how to install a car radio on your Toyota Auris 2. To achieve this, initially we will see how to remove the old car radio, then how to install a car radio on Toyota Auris 2 and at last, how to connect it.
How to install car radio on Toyota Auris 2: Removing the old car stereo
Before we get down to the serious business of how to install a car stereo on your Toyota Auris 2, there is one fundamental task, take off the audio set you currently have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start dismantling, always don’t forget to remove the negative wire from the battery to avoid any risk of short-circuit or electrocution. Once this is carried out, here are the two ways according to the stereo that equips your Toyota Auris 2:
- Original car radio:
In this instance, you’ll have to be patient, generally speaking, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this procedure will not be enough to remove the old car radio from your Toyota Auris 2. In fact, you will need to remove certain auto parts of the centre console to access the car radio itself. To get this done, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections. - Aftermarket radio :
In this circumstance the process is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is carried out, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve accomplished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Toyota Auris 2: Fitting and connecting the car radio
Let’s go to the most important part for you, how to install a car stereo on your Toyota Auris 2. Before you start, take some time to check the suitability of your car and your headunit, and to read the installation recommendations, which may give you specific guidelines.
Here are the various actions required in installing an aftermarket car radio. To begin with, put in place the metal frame supplied with your new car radio, this frame has the task of holding your car radio in place on your Toyota Auris 2, once installed, don’t forget to press the locking tabs on each side of the frame. Once this step has been finished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Toyota Auris 2, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just learned how to install a car radio on Toyota Auris 2, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other concerns, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.
Whenever you have any further questions about the Toyota Auris 2, do not hesitate to consult our Toyota Auris 2 category.
