You’re uninterested in listening to cassettes and only having the capability to listent to the radio, while your smart phone is filled with your favourite music file but you don’t have a 3.5mm or usb port on your car radio, so you can’t enjoy your car trips to the fullest… That’s specifically why we’ve posted this article content to help you, because in this article you’re going to find out how to install a car radio on your Tesla Model X. To do this, initially we will see how to remove the old car radio, then how to install a car radio on Tesla Model X and at last, how to connect it.

install-car-radio-tesla-model-x

How to install car radio on Tesla Model X: Removing the old car stereo

Before we begin the serious business of how to install a car stereo on your Tesla Model X, there is one important task, take off the audio set you already have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start taking out, always be sure you remove the negative wire from the battery to prevent any risk of short-circuit or electrocution. Once this is achieved, here are the two solutions according to the stereo that equips your Tesla Model X:

  • Original car radio:
    In cases like this, you’ll have to be persistent, in most cases, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this operation will not be enough to remove the old car radio from your Tesla Model X. In actual fact, you will need to remove certain auto parts of the centre console to access the car radio itself. To do this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections.
  • Aftermarket radio :
    In this situation the operation is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is achieved, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve completed dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your Tesla Model X: Fitting and connecting the car radio

Let’s go to the most important step for you, how to install a car stereo on your Tesla Model X. Ahead of time, spend some time to check the compatibility of your car and your headunit, and to read the installation recommendations, which may give you specific recommendations.
Here are the various guidelines involved in installing an aftermarket car radio. First of all, put in place the metal frame provided with your new car radio, this frame has the function of holding your car radio in place on your Tesla Model X, once situated, be sure you press the locking tabs on each side of the frame. Once this step has been finished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Tesla Model X, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just discovered how to install a car radio on Tesla Model X, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.

If you wish more guides on the Tesla Model X, go to our Tesla Model X category.