You’re tired of listening to cassettes and only being able to enjoy the radio, while your smartphone is loaded with your preferred music but you don’t have a 3.5mm or usb port on your car radio, so you can’t enjoy your car journeys to the fullest… That’s specifically why we’ve written this content to help you, because in this article you’re going to find out how to install a car radio on your Suzuki Sx4. To make this happen, initially we will find out how to remove the old car radio, then how to install a car radio on Suzuki Sx4 and finally, how to connect it.

install-car-radio-suzuki-sx4

How to install car radio on Suzuki Sx4: Removing the old car stereo

Before we get down to the serious business of how to install a car stereo on your Suzuki Sx4, there is one necessary task, take off the audio set you already have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start dismantling, always don’t forget to remove the negative wire from the battery to avoid any risk of short-circuit or electrocution. Once this is done, here are the two techniques depending on the stereo that equips your Suzuki Sx4:

  • Original car radio:
    In this instance, you’ll have to be patient, most of the time, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this process will not be enough to remove the old car radio from your Suzuki Sx4. In truth, you will need to remove certain parts of the centre console to access the car radio itself. To do this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections.
  • Aftermarket radio :
    In this circumstance the procedure is easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is done, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve accomplished dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your Suzuki Sx4: Fitting and connecting the car radio

Let’s go to the most important part for you, how to install a car stereo on your Suzuki Sx4. Beforehand, take some time to verify the compatibility of your car and your headunit, and to read the installation recommendations, which may give you specific guidelines.
Here are the various guidelines required in installing an aftermarket car radio. First of all, put in place the metal frame provided with your new car radio, this frame has the role of holding your car radio in place on your Suzuki Sx4, once placed, don’t forget to press the locking tabs on each side of the frame. Once this step has been achieved, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Suzuki Sx4, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adapt it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just learned how to install a car radio on Suzuki Sx4, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other complications, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.

To discover more tips on the Suzuki Sx4, take a look at the Suzuki Sx4 category.