You’re tired of listening to cassettes and only being able to enjoy the radio, while your smartphone is loaded with your favourite tracks but you don’t have a 3.5mm or usb port on your car radio, so you can’t enjoy your car journeys to the fullest… That’s exactly why we’ve created this article content to help you, because in this article you’re going to find out how to install a car radio on your Suzuki Grand Vitara. To do this, first we will discover how to remove the old car radio, then how to install a car radio on Suzuki Grand Vitara and finally, how to connect it.
How to install car radio on Suzuki Grand Vitara: Removing the old car stereo
Before we get down to the serious business of how to install a car stereo on your Suzuki Grand Vitara, there is one necessary task, take off the audio set you already have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start dismantling, always make sure to remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is achieved, here are the two ways depending on the stereo that equips your Suzuki Grand Vitara:
- Original car radio:
In cases like this, you’ll have to be patient, in general, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this procedure will not be enough to remove the old car radio from your Suzuki Grand Vitara. Indeed, you will need to remove certain parts of the centre console to access the car radio itself. To get this done, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, make sure to disconnect all the connections. - Aftermarket radio :
In this situation the operation is easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is achieved, make sure to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve completed dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Suzuki Grand Vitara: Fitting and connecting the car radio
Let’s go to the essential section for you, how to install a car stereo on your Suzuki Grand Vitara. Before you start, take the time to verify the compatibility of your car and your headunit, and to read the installation information, which may give you specific guidelines.
Here are the various actions required in installing an aftermarket car radio. First of all, put in place the metal frame provided with your new car radio, this frame has the role of holding your car radio in place on your Suzuki Grand Vitara, once situated, make sure to press the locking tabs on each side of the frame. Once this step has been finished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Suzuki Grand Vitara, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adapt it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just learned how to install a car radio on Suzuki Grand Vitara, make sure to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other trouble, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
To get more tips on the Suzuki Grand Vitara, take a look at the Suzuki Grand Vitara category.
