You’re tired of listening to cassettes and only having the capability to listent to the radio, while your smartphone is filled with your preferred music file but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car journeys to the fullest… That’s exactly why we’ve created this content page to help you, because right now you’re going to learn about how to install a car radio on your Suzuki Across. To accomplish this, first we will see how to remove the old car radio, then how to install a car radio on Suzuki Across and finally, how to connect it.

install-car-radio-suzuki-across

How to install car radio on Suzuki Across: Removing the old car stereo

Before we begin the serious business of how to install a car stereo on your Suzuki Across, there is one necessary task, remove the audio set you currently have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start taking out, always don’t forget to remove the negative wire from the battery to prevent any risk of short-circuit or electrocution. Once this is carried out, here are the two methods dependent on the stereo that equips your Suzuki Across:

  • Original car radio:
    In this instance, you’ll have to be patient, in general, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this operation will not be enough to remove the old car radio from your Suzuki Across. In reality, you will need to remove certain parts of the centre console to access the car radio itself. To accomplish this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections.
  • Aftermarket radio :
    In this scenario the process is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is carried out, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve finished dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your Suzuki Across: Fitting and connecting the car radio

Let’s go to the essential part for you, how to install a car stereo on your Suzuki Across. Beforehand, take some time to verify the suitability of your car and your headunit, and to read the installation instructions, which may give you specific recommendations.
Here are the various steps required in installing an aftermarket car radio. First of all, put in place the metal frame provided with your new car radio, this frame has the function of holding your car radio in place on your Suzuki Across, once situated, don’t forget to press the locking tabs on each side of the frame. Once this step has been finished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Suzuki Across, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just learned how to install a car radio on Suzuki Across, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.

To discover more tips on the Suzuki Across, take a look at the Suzuki Across category.