You’re uninterested in listening to cassettes and only having the capability to listent to the radio, while your smartphone is filled with your favourite tracks but you don’t have a 3.5mm or usb port on your car radio, so you can’t enjoy your car trips to the fullest… That’s exactly why we’ve posted this content page to help you, because now you’re going to learn about how to install a car radio on your Subaru Legacy. To accomplish this, first we will see how to remove the old car radio, then how to install a car radio on Subaru Legacy and finally, how to connect it.
How to install car radio on Subaru Legacy: Removing the old car stereo
Before we begin the serious business of how to install a car stereo on your Subaru Legacy, there is one imperative step, take out the audio set you already have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start taking out, always be sure you remove the negative cable from the battery to prevent any risk of short-circuit or electrocution. Once this is achieved, here are the two methods determined by the stereo that equips your Subaru Legacy:
- Original car radio:
In this instance, you’ll have to be patient, in most cases, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this operation will not be enough to remove the old car radio from your Subaru Legacy. Actually, you will need to remove certain auto parts of the centre console to access the car radio itself. To accomplish this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections. - Aftermarket radio :
In this situation the operation is much easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is achieved, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve ended dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Subaru Legacy: Fitting and connecting the car radio
Let’s go to the most important step for you, how to install a car stereo on your Subaru Legacy. Before you start, take some time to examine the suitability of your car and your headunit, and to read the installation instructions, which may give you specific instructions.
Here are the various steps required in installing an aftermarket car radio. To begin with, put in place the metal frame provided with your new car radio, this frame has the task of holding your car radio in place on your Subaru Legacy, once situated, be sure you press the locking tabs on each side of the frame. Once this step has been done, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Subaru Legacy, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just learned how to install a car radio on Subaru Legacy, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.
To discover more tips on the Subaru Legacy, take a look at the Subaru Legacy category.
