You’re uninterested in listening to cassettes and only being able to listent to the radio, while your smart phone is full of your favourite music file but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car travels to the fullest… That’s specifically why we’ve created this article to help you, because right now you’re going to learn about how to install a car radio on your Seat Arona. To achieve this, first we will discover how to remove the old car radio, then how to install a car radio on Seat Arona and finally, how to connect it.
How to install car radio on Seat Arona: Removing the old car stereo
Before we begin the serious business of how to install a car stereo on your Seat Arona, there is one essential step, take out the audio set you already have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start dismantling, always don’t forget to remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is conducted, here are the two ways according to the stereo that equips your Seat Arona:
- Original car radio:
In this case, you’ll have to be patient, in general, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this operation will not be enough to remove the old car radio from your Seat Arona. Actually, you will need to remove certain parts of the centre console to access the car radio itself. To make this happen, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections. - Aftermarket radio :
In this situation the technique is easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is conducted, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve concluded dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Seat Arona: Fitting and connecting the car radio
Let’s go to the essential step for you, how to install a car stereo on your Seat Arona. Ahead of time, take some time to verify the compatibility of your car and your headunit, and to read the installation instructions, which may give you specific instructions.
Here are the various guidelines required in installing an aftermarket car radio. To begin with, put in place the metal frame supplied with your new car radio, this frame has the job of holding your car radio in place on your Seat Arona, once situated, don’t forget to press the locking tabs on each side of the frame. Once this step has been done, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Seat Arona, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Seat Arona, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other trouble, or want to learn more about your car, don’t think twice to visit our page dedicated to it.
To get more tips on the Seat Arona, take a look at the Seat Arona category.
