You’re sick and tired of listening to cassettes and only having the capacity to listent to the radio, while your smart phone is filled with your favourite music file but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car travels to the fullest… That’s precisely why we’ve written this content page to help you, because in this article you’re going to learn about how to install a car radio on your seat altea. To accomplish this, first we will discover how to remove the old car radio, then how to install a car radio on seat altea and at last, how to connect it.

install-car-radio-seat-altea

How to install car radio on seat altea: Removing the old car stereo

Before we start the serious business of how to install a car stereo on your seat altea, there is one necessary step, remove the audio set you already have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start taking out, always make sure to remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is conducted, here are the two solutions based on the stereo that equips your seat altea:

  • Original car radio:
    In this case, you’ll have to be persistent, generally, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this operation will not be enough to remove the old car radio from your seat altea. In actual fact, you will need to remove certain parts of the centre console to access the car radio itself. To accomplish this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, make sure to disconnect all the connections.
  • Aftermarket radio :
    In this scenario the method is easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is conducted, make sure to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve concluded dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your seat altea: Fitting and connecting the car radio

Let’s go to the essential part for you, how to install a car stereo on your seat altea. Ahead of time, spend some time to verify the compatibility of your car and your headunit, and to read the installation information, which may give you specific instructions.
Here are the various steps required in installing an aftermarket car radio. Firstly, put in place the metal frame supplied with your new car radio, this frame has the job of holding your car radio in place on your seat altea, once positioned, make sure to press the locking tabs on each side of the frame. Once this step has been accomplished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your seat altea, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on seat altea, make sure to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other concerns, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.

To get more tips on the seat altea, take a look at the seat altea category.