You’re sick and tired of listening to cassettes and only having the capacity to enjoy the radio, while your smart phone is full of your preferred tracks but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car travels to the fullest… That’s exactly why we’ve written this content to help you, because now you’re going to learn about how to install a car radio on your Renault Twingo 3. To accomplish this, first of all we will see how to remove the old car radio, then how to install a car radio on Renault Twingo 3 and to finish, how to connect it.
How to install car radio on Renault Twingo 3: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your Renault Twingo 3, there is one important step, take out the audio set you currently have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start dismantling, always be sure you remove the negative wire from the battery to avoid any risk of short-circuit or electrocution. Once this is done, here are the two ways dependent on the stereo that equips your Renault Twingo 3:
- Original car radio:
In this case, you’ll have to be patient, in most cases, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this procedure will not be enough to remove the old car radio from your Renault Twingo 3. Indeed, you will need to remove certain auto parts of the centre console to access the car radio itself. To do this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections. - Aftermarket radio :
In this scenario the process is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is done, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve ended dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Renault Twingo 3: Fitting and connecting the car radio
Let’s go to the most important section for you, how to install a car stereo on your Renault Twingo 3. Before you start, take some time to check the suitability of your car and your headunit, and to read the installation recommendations, which may give you specific guidelines.
Here are the various actions required in installing an aftermarket car radio. To begin with, put in place the metal frame supplied with your new car radio, this frame has the task of holding your car radio in place on your Renault Twingo 3, once placed, be sure you press the locking tabs on each side of the frame. Once this step has been carried out, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Renault Twingo 3, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just learned how to install a car radio on Renault Twingo 3, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t think twice to visit our page dedicated to it.
Whenever you have any additional questions about the Renault Twingo 3, do not hesitate to consult our Renault Twingo 3 category.
