You’re bored with listening to cassettes and only having the capacity to listent to the radio, while your smart phone is full of your preferred tracks but you don’t have a jack or usb port on your car radio, so you can’t enjoy your car trips to the fullest… That’s precisely why we’ve posted this article content to help you, because now you’re going to learn about how to install a car radio on your Renault Twingo 2. To achieve this, first we will see how to remove the old car radio, then how to install a car radio on Renault Twingo 2 and at last, how to connect it.

install-car-radio-renault-twingo-2

How to install car radio on Renault Twingo 2: Removing the old car stereo

Before we start the serious business of how to install a car stereo on your Renault Twingo 2, there is one essential step, take out the audio set you currently have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start dismantling, always make sure to remove the negative wire from the battery to avoid any risk of short-circuit or electrocution. Once this is completed, here are the two solutions dependent on the stereo that equips your Renault Twingo 2:

  • Original car radio:
    In this instance, you’ll have to be patient, in most cases, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this operation will not be enough to remove the old car radio from your Renault Twingo 2. In truth, you will need to remove certain auto parts of the centre console to access the car radio itself. To get this done, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, make sure to disconnect all the connections.
  • Aftermarket radio :
    In this circumstance the technique is easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is completed, make sure to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve completed dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your Renault Twingo 2: Fitting and connecting the car radio

Let’s go to the essential step for you, how to install a car stereo on your Renault Twingo 2. Beforehand, take some time to check the suitability of your car and your headunit, and to read the installation information, which may give you specific recommendations.
Here are the various actions involved in installing an aftermarket car radio. To begin with, put in place the metal frame provided with your new car radio, this frame has the job of holding your car radio in place on your Renault Twingo 2, once placed, make sure to press the locking tabs on each side of the frame. Once this step has been done, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Renault Twingo 2, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adapt it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just learned how to install a car radio on Renault Twingo 2, make sure to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other complications, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.

To discover more tips on the Renault Twingo 2, take a look at the Renault Twingo 2 category.