You’re tired of listening to cassettes and only having the capability to listent to the radio, while your smart phone is loaded with your favourite music file but you don’t have a 3.5mm or usb port on your car radio, so you can’t enjoy your car travels to the fullest… That’s precisely why we’ve posted this article to help you, because in this article you’re going to learn about how to install a car radio on your Renault Scenic. To make this happen, first of all we will discover how to remove the old car radio, then how to install a car radio on Renault Scenic and to finish, how to connect it.
How to install car radio on Renault Scenic: Removing the old car stereo
Before we begin the serious business of how to install a car stereo on your Renault Scenic, there is one essential step, take off the audio set you already have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start taking out, always be sure you remove the negative cable from the battery to prevent any risk of short-circuit or electrocution. Once this is completed, here are the two methods based on the stereo that equips your Renault Scenic:
- Original car radio:
In cases like this, you’ll have to be patient, most of the time, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this operation will not be enough to remove the old car radio from your Renault Scenic. In fact, you will need to remove certain auto parts of the centre console to access the car radio itself. To make this happen, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections. - Aftermarket radio :
In this scenario the process is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is completed, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve concluded dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Renault Scenic: Fitting and connecting the car radio
Let’s go to the most important step for you, how to install a car stereo on your Renault Scenic. Beforehand, spend some time to verify the compatibility of your car and your headunit, and to read the installation instructions, which may give you specific recommendations.
Here are the various steps involved in installing an aftermarket car radio. To begin with, put in place the metal frame provided with your new car radio, this frame has the function of holding your car radio in place on your Renault Scenic, once installed, be sure you press the locking tabs on each side of the frame. Once this step has been carried out, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Renault Scenic, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adapt it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just discovered how to install a car radio on Renault Scenic, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other complications, or want to learn more about your car, don’t think twice to visit our page dedicated to it.
If you wish more tutorials on the Renault Scenic, go to our Renault Scenic category.
