You’re sick and tired of listening to cassettes and only having the capability to listent to the radio, while your smartphone is full of your favourite music file but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car trips to the fullest… That’s exactly why we’ve written and published this article content to help you, because right now you’re going to find out how to install a car radio on your Renault Laguna. To get this done, first of all we will discover how to remove the old car radio, then how to install a car radio on Renault Laguna and to finish, how to connect it.
How to install car radio on Renault Laguna: Removing the old car stereo
Before we begin the serious business of how to install a car stereo on your Renault Laguna, there is one important task, take out the audio set you currently have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start dismantling, always don’t forget to remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is completed, here are the two options determined by the stereo that equips your Renault Laguna:
- Original car radio:
In cases like this, you’ll have to be persistent, generally speaking, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this process will not be enough to remove the old car radio from your Renault Laguna. In truth, you will need to remove certain parts of the centre console to access the car radio itself. To accomplish this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections. - Aftermarket radio :
In this scenario the procedure is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is completed, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve finished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Renault Laguna: Fitting and connecting the car radio
Let’s go to the most important step for you, how to install a car stereo on your Renault Laguna. Ahead of time, spend some time to examine the suitability of your car and your headunit, and to read the installation recommendations, which may give you specific recommendations.
Here are the various steps involved in installing an aftermarket car radio. Firstly, put in place the metal frame provided with your new car radio, this frame has the role of holding your car radio in place on your Renault Laguna, once situated, don’t forget to press the locking tabs on each side of the frame. Once this step has been done, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Renault Laguna, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adapt it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just discovered how to install a car radio on Renault Laguna, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other complications, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
If perhaps you have any further questions about the Renault Laguna, do not hesitate to consult our Renault Laguna category.
