You’re sick and tired of listening to cassettes and only having the ability to listent to the radio, while your smart phone is filled with your preferred music file but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car travels to the fullest… That’s precisely why we’ve written this content to help you, because right now you’re going to find out how to install a car radio on your Ram ProMaster City. To achieve this, first we will discover how to remove the old car radio, then how to install a car radio on Ram ProMaster City and at last, how to connect it.

install-car-radio-ram-promaster-city

How to install car radio on Ram ProMaster City: Removing the old car stereo

Before we get down to the serious business of how to install a car stereo on your Ram ProMaster City, there is one necessary task, take out the audio set you already have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start dismantling, always remember to remove the negative wire from the battery to prevent any risk of short-circuit or electrocution. Once this is conducted, here are the two methods dependant upon the stereo that equips your Ram ProMaster City:

  • Original car radio:
    In this case, you’ll have to be patient, in general, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this procedure will not be enough to remove the old car radio from your Ram ProMaster City. In fact, you will need to remove certain parts of the centre console to access the car radio itself. To make this happen, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections.
  • Aftermarket radio :
    In this circumstance the operation is easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is conducted, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve ended dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your Ram ProMaster City: Fitting and connecting the car radio

Let’s go to the most important step for you, how to install a car stereo on your Ram ProMaster City. Ahead of time, spend some time to verify the suitability of your car and your headunit, and to read the installation recommendations, which may give you specific recommendations.
Here are the various steps involved in installing an aftermarket car radio. Firstly, put in place the metal frame supplied with your new car radio, this frame has the job of holding your car radio in place on your Ram ProMaster City, once positioned, remember to press the locking tabs on each side of the frame. Once this step has been achieved, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Ram ProMaster City, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adapt it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just learned how to install a car radio on Ram ProMaster City, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other concerns, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.

If you want more guides on the Ram ProMaster City, go to our Ram ProMaster City category.