You’re uninterested in listening to cassettes and only having the capacity to listent to the radio, while your smartphone is filled with your favourite music file but you don’t have a 3.5mm or usb port on your car radio, so you can’t enjoy your car trips to the fullest… That’s specifically why we’ve written and published this content to help you, because in this article you’re going to find out how to install a car radio on your Porsche Macan. To achieve this, first we will find out how to remove the old car radio, then how to install a car radio on Porsche Macan and at last, how to connect it.
How to install car radio on Porsche Macan: Removing the old car stereo
Before we get down to the serious business of how to install a car stereo on your Porsche Macan, there is one necessary task, remove the audio set you currently have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start taking out, always don’t forget to remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is achieved, here are the two ways determined by the stereo that equips your Porsche Macan:
- Original car radio:
In this case, you’ll have to be patient, in general, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this procedure will not be enough to remove the old car radio from your Porsche Macan. In reality, you will need to remove certain auto parts of the centre console to access the car radio itself. To make this happen, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections. - Aftermarket radio :
In this situation the method is much easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is achieved, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve ended dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Porsche Macan: Fitting and connecting the car radio
Let’s go to the most important part for you, how to install a car stereo on your Porsche Macan. Beforehand, take some time to check the suitability of your car and your headunit, and to read the installation information, which may give you specific recommendations.
Here are the various steps required in installing an aftermarket car radio. To begin with, put in place the metal frame provided with your new car radio, this frame has the role of holding your car radio in place on your Porsche Macan, once positioned, don’t forget to press the locking tabs on each side of the frame. Once this step has been accomplished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Porsche Macan, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adapt it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just learned how to install a car radio on Porsche Macan, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other trouble, or want to learn more about your car, don’t think twice to visit our page dedicated to it.
To get more tips on the Porsche Macan, take a look at the Porsche Macan category.
