You’re bored with listening to cassettes and only having the ability to listent to the radio, while your phone is loaded with your favourite tracks but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car journeys to the fullest… That’s exactly why we’ve made this article to help you, because in this article you’re going to find out how to install a car radio on your Peugeot Rifter. To accomplish this, first of all we will find out how to remove the old car radio, then how to install a car radio on Peugeot Rifter and finally, how to connect it.

install-car-radio-peugeot-rifter

How to install car radio on Peugeot Rifter: Removing the old car stereo

Before we begin the serious business of how to install a car stereo on your Peugeot Rifter, there is one necessary task, take away the audio set you currently have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start taking out, always remember to remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is carried out, here are the two methods determined by the stereo that equips your Peugeot Rifter:

  • Original car radio:
    In this instance, you’ll have to be patient, generally speaking, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this procedure will not be enough to remove the old car radio from your Peugeot Rifter. In actual fact, you will need to remove certain parts of the centre console to access the car radio itself. To get this done, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections.
  • Aftermarket radio :
    In this circumstance the procedure is much easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is carried out, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve ended dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your Peugeot Rifter: Fitting and connecting the car radio

Let’s go to the most important step for you, how to install a car stereo on your Peugeot Rifter. Ahead of time, take the time to verify the suitability of your car and your headunit, and to read the installation instructions, which may give you specific instructions.
Here are the various steps required in installing an aftermarket car radio. To begin with, put in place the metal frame supplied with your new car radio, this frame has the task of holding your car radio in place on your Peugeot Rifter, once installed, remember to press the locking tabs on each side of the frame. Once this step has been achieved, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Peugeot Rifter, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adapt it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just learned how to install a car radio on Peugeot Rifter, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other concerns, or want to learn more about your car, don’t think twice to visit our page dedicated to it.

To discover more tips on the Peugeot Rifter, take a look at the Peugeot Rifter category.