You’re tired of listening to cassettes and only having the ability to listent to the radio, while your smartphone is full of your favourite music file but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car trips to the fullest… That’s specifically why we’ve written and published this article content to help you, because now you’re going to learn about how to install a car radio on your Peugeot Expert Tepee. To accomplish this, first we will find out how to remove the old car radio, then how to install a car radio on Peugeot Expert Tepee and finally, how to connect it.

install-car-radio-peugeot-expert-tepee

How to install car radio on Peugeot Expert Tepee: Removing the old car stereo

Before we start the serious business of how to install a car stereo on your Peugeot Expert Tepee, there is one essential step, remove the audio set you currently have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start dismantling, always make sure to remove the negative wire from the battery to prevent any risk of short-circuit or electrocution. Once this is carried out, here are the two solutions according to the stereo that equips your Peugeot Expert Tepee:

  • Original car radio:
    In this instance, you’ll have to be persistent, in most cases, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this operation will not be enough to remove the old car radio from your Peugeot Expert Tepee. In actual fact, you will need to remove certain parts of the centre console to access the car radio itself. To make this happen, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, make sure to disconnect all the connections.
  • Aftermarket radio :
    In this situation the procedure is easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is carried out, make sure to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve ended dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your Peugeot Expert Tepee: Fitting and connecting the car radio

Let’s go to the essential step for you, how to install a car stereo on your Peugeot Expert Tepee. Ahead of time, take some time to check the compatibility of your car and your headunit, and to read the installation information, which may give you specific instructions.
Here are the various actions involved in installing an aftermarket car radio. Firstly, put in place the metal frame provided with your new car radio, this frame has the role of holding your car radio in place on your Peugeot Expert Tepee, once positioned, make sure to press the locking tabs on each side of the frame. Once this step has been completed, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Peugeot Expert Tepee, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adapt it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just learned how to install a car radio on Peugeot Expert Tepee, make sure to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other complications, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.

If you wish more tutorials on the Peugeot Expert Tepee, go to our Peugeot Expert Tepee category.