You’re sick and tired of listening to cassettes and only having the ability to enjoy the radio, while your smart phone is filled with your preferred music but you don’t have a jack or usb port on your car radio, so you can’t enjoy your car journeys to the fullest… That’s specifically why we’ve created this content to help you, because now you’re going to find out how to install a car radio on your Peugeot Bipper. To do this, first of all we will find out how to remove the old car radio, then how to install a car radio on Peugeot Bipper and to finish, how to connect it.

install-car-radio-peugeot-bipper

How to install car radio on Peugeot Bipper: Removing the old car stereo

Before we begin the serious business of how to install a car stereo on your Peugeot Bipper, there is one important step, remove the audio set you already have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start dismantling, always remember to remove the negative cable from the battery to prevent any risk of short-circuit or electrocution. Once this is done, here are the two options depending on the stereo that equips your Peugeot Bipper:

  • Original car radio:
    In this instance, you’ll have to be patient, most of the time, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this procedure will not be enough to remove the old car radio from your Peugeot Bipper. Indeed, you will need to remove certain auto parts of the centre console to access the car radio itself. To get this done, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections.
  • Aftermarket radio :
    In this scenario the operation is much easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is done, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve ended dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your Peugeot Bipper: Fitting and connecting the car radio

Let’s go to the essential part for you, how to install a car stereo on your Peugeot Bipper. Before you start, take some time to verify the suitability of your car and your headunit, and to read the installation information, which may give you specific instructions.
Here are the various steps involved in installing an aftermarket car radio. To begin with, put in place the metal frame provided with your new car radio, this frame has the role of holding your car radio in place on your Peugeot Bipper, once placed, remember to press the locking tabs on each side of the frame. Once this step has been carried out, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Peugeot Bipper, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just learned how to install a car radio on Peugeot Bipper, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.

To find more tips on the Peugeot Bipper, take a look at the Peugeot Bipper category.