You’re sick and tired of listening to cassettes and only being able to enjoy the radio, while your phone is full of your preferred tracks but you don’t have a jack or usb port on your car radio, so you can’t enjoy your car journeys to the fullest… That’s exactly why we’ve written this content page to help you, because in this article you’re going to learn about how to install a car radio on your Peugeot 4007. To achieve this, first we will discover how to remove the old car radio, then how to install a car radio on Peugeot 4007 and to finish, how to connect it.
How to install car radio on Peugeot 4007: Removing the old car stereo
Before we get down to the serious business of how to install a car stereo on your Peugeot 4007, there is one imperative task, take away the audio set you already have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start dismantling, always don’t forget to remove the negative wire from the battery to avoid any risk of short-circuit or electrocution. Once this is achieved, here are the two ways according to the stereo that equips your Peugeot 4007:
- Original car radio:
In this instance, you’ll have to be persistent, most of the time, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this procedure will not be enough to remove the old car radio from your Peugeot 4007. In reality, you will need to remove certain parts of the centre console to access the car radio itself. To accomplish this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections. - Aftermarket radio :
In this circumstance the operation is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is achieved, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve ended dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Peugeot 4007: Fitting and connecting the car radio
Let’s go to the most important part for you, how to install a car stereo on your Peugeot 4007. Ahead of time, take the time to verify the suitability of your car and your headunit, and to read the installation instructions, which may give you specific guidelines.
Here are the various steps required in installing an aftermarket car radio. First of all, put in place the metal frame supplied with your new car radio, this frame has the job of holding your car radio in place on your Peugeot 4007, once installed, don’t forget to press the locking tabs on each side of the frame. Once this step has been accomplished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Peugeot 4007, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adapt it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just learned how to install a car radio on Peugeot 4007, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
In the event that you have any further questions about the Peugeot 4007, do not hesitate to consult our Peugeot 4007 category.
