You’re bored with listening to cassettes and only having the capacity to listent to the radio, while your smart phone is filled with your preferred tracks but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car travels to the fullest… That’s specifically why we’ve written this article to help you, because in this article you’re going to find out how to install a car radio on your Peugeot 309. To do this, first we will discover how to remove the old car radio, then how to install a car radio on Peugeot 309 and at last, how to connect it.

install-car-radio-peugeot-309

How to install car radio on Peugeot 309: Removing the old car stereo

Before we begin the serious business of how to install a car stereo on your Peugeot 309, there is one necessary task, take off the audio set you currently have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start dismantling, always don’t forget to remove the negative wire from the battery to avoid any risk of short-circuit or electrocution. Once this is completed, here are the two ways determined by the stereo that equips your Peugeot 309:

  • Original car radio:
    In this instance, you’ll have to be patient, in general, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this procedure will not be enough to remove the old car radio from your Peugeot 309. In actual fact, you will need to remove certain auto parts of the centre console to access the car radio itself. To make this happen, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections.
  • Aftermarket radio :
    In this scenario the process is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is completed, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve concluded dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your Peugeot 309: Fitting and connecting the car radio

Let’s go to the most important section for you, how to install a car stereo on your Peugeot 309. Beforehand, take the time to verify the suitability of your car and your headunit, and to read the installation instructions, which may give you specific instructions.
Here are the various guidelines involved in installing an aftermarket car radio. Firstly, put in place the metal frame provided with your new car radio, this frame has the job of holding your car radio in place on your Peugeot 309, once placed, don’t forget to press the locking tabs on each side of the frame. Once this step has been finished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Peugeot 309, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just discovered how to install a car radio on Peugeot 309, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other complications, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.

If you want more tutorials on the Peugeot 309, go to our Peugeot 309 category.