You’re sick and tired of listening to cassettes and only being able to enjoy the radio, while your smart phone is full of your preferred tracks but you don’t have a 3.5mm or usb port on your car radio, so you can’t enjoy your car trips to the fullest… That’s specifically why we’ve made this content page to help you, because now you’re going to learn about how to install a car radio on your Peugeot 306. To do this, initially we will discover how to remove the old car radio, then how to install a car radio on Peugeot 306 and to finish, how to connect it.

install-car-radio-peugeot-306

How to install car radio on Peugeot 306: Removing the old car stereo

Before we begin the serious business of how to install a car stereo on your Peugeot 306, there is one essential task, remove the audio set you already have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start taking out, always make sure to remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is achieved, here are the two options based on the stereo that equips your Peugeot 306:

  • Original car radio:
    In cases like this, you’ll have to be persistent, most of the time, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this operation will not be enough to remove the old car radio from your Peugeot 306. In truth, you will need to remove certain auto parts of the centre console to access the car radio itself. To make this happen, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, make sure to disconnect all the connections.
  • Aftermarket radio :
    In this circumstance the operation is much easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is achieved, make sure to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve ended dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your Peugeot 306: Fitting and connecting the car radio

Let’s go to the essential section for you, how to install a car stereo on your Peugeot 306. Ahead of time, spend some time to examine the suitability of your car and your headunit, and to read the installation recommendations, which may give you specific recommendations.
Here are the various steps required in installing an aftermarket car radio. Firstly, put in place the metal frame provided with your new car radio, this frame has the task of holding your car radio in place on your Peugeot 306, once positioned, make sure to press the locking tabs on each side of the frame. Once this step has been carried out, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Peugeot 306, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adapt it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just discovered how to install a car radio on Peugeot 306, make sure to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t think twice to visit our page dedicated to it.

Whenever you have any further questions about the Peugeot 306, do not hesitate to consult our Peugeot 306 category.