You’re tired of listening to cassettes and only having the capacity to enjoy the radio, while your smart phone is full of your favourite music but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car travels to the fullest… That’s specifically why we’ve created this article content to help you, because right now you’re going to learn about how to install a car radio on your Peugeot 205. To do this, first of all we will discover how to remove the old car radio, then how to install a car radio on Peugeot 205 and to finish, how to connect it.
How to install car radio on Peugeot 205: Removing the old car stereo
Before we get down to the serious business of how to install a car stereo on your Peugeot 205, there is one necessary step, take off the audio set you currently have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start dismantling, always don’t forget to remove the negative cable from the battery to prevent any risk of short-circuit or electrocution. Once this is achieved, here are the two methods depending on the stereo that equips your Peugeot 205:
- Original car radio:
In cases like this, you’ll have to be persistent, most of the time, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this operation will not be enough to remove the old car radio from your Peugeot 205. Actually, you will need to remove certain parts of the centre console to access the car radio itself. To accomplish this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections. - Aftermarket radio :
In this situation the procedure is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is achieved, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve accomplished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Peugeot 205: Fitting and connecting the car radio
Let’s go to the essential section for you, how to install a car stereo on your Peugeot 205. Beforehand, spend some time to examine the compatibility of your car and your headunit, and to read the installation recommendations, which may give you specific recommendations.
Here are the various guidelines involved in installing an aftermarket car radio. First of all, put in place the metal frame provided with your new car radio, this frame has the task of holding your car radio in place on your Peugeot 205, once situated, don’t forget to press the locking tabs on each side of the frame. Once this step has been completed, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Peugeot 205, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just discovered how to install a car radio on Peugeot 205, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other trouble, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
In the event that you have any further questions about the Peugeot 205, do not hesitate to consult our Peugeot 205 category.
