You’re sick and tired of listening to cassettes and only having the capability to enjoy the radio, while your smartphone is loaded with your favourite music but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car trips to the fullest… That’s specifically why we’ve written and published this content page to help you, because in this article you’re going to learn about how to install a car radio on your Opel Vivaro. To achieve this, first of all we will find out how to remove the old car radio, then how to install a car radio on Opel Vivaro and at last, how to connect it.
How to install car radio on Opel Vivaro: Removing the old car stereo
Before we get down to the serious business of how to install a car stereo on your Opel Vivaro, there is one imperative task, take off the audio set you currently have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start taking out, always be sure you remove the negative wire from the battery to prevent any risk of short-circuit or electrocution. Once this is conducted, here are the two ways dependant upon the stereo that equips your Opel Vivaro:
- Original car radio:
In this instance, you’ll have to be persistent, most of the time, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this process will not be enough to remove the old car radio from your Opel Vivaro. Actually, you will need to remove certain parts of the centre console to access the car radio itself. To achieve this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections. - Aftermarket radio :
In this circumstance the operation is much easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is conducted, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve finished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Opel Vivaro: Fitting and connecting the car radio
Let’s go to the essential step for you, how to install a car stereo on your Opel Vivaro. Before you start, take some time to examine the compatibility of your car and your headunit, and to read the installation recommendations, which may give you specific guidelines.
Here are the various guidelines involved in installing an aftermarket car radio. To begin with, put in place the metal frame supplied with your new car radio, this frame has the role of holding your car radio in place on your Opel Vivaro, once installed, be sure you press the locking tabs on each side of the frame. Once this step has been achieved, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Opel Vivaro, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Opel Vivaro, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other complications, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
If you have any further questions about the Opel Vivaro, do not hesitate to consult our Opel Vivaro category.
