You’re uninterested in listening to cassettes and only having the ability to listent to the radio, while your phone is filled with your favourite music but you don’t have a 3.5mm or usb port on your car radio, so you can’t enjoy your car trips to the fullest… That’s specifically why we’ve created this article content to help you, because now you’re going to learn about how to install a car radio on your Opel Vectra. To achieve this, initially we will discover how to remove the old car radio, then how to install a car radio on Opel Vectra and finally, how to connect it.
How to install car radio on Opel Vectra: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your Opel Vectra, there is one essential task, take away the audio set you currently have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start taking out, always make sure to remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is carried out, here are the two methods dependent on the stereo that equips your Opel Vectra:
- Original car radio:
In this case, you’ll have to be persistent, most of the time, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this process will not be enough to remove the old car radio from your Opel Vectra. Actually, you will need to remove certain auto parts of the centre console to access the car radio itself. To do this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, make sure to disconnect all the connections. - Aftermarket radio :
In this scenario the procedure is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is carried out, make sure to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve ended dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Opel Vectra: Fitting and connecting the car radio
Let’s go to the most important section for you, how to install a car stereo on your Opel Vectra. Beforehand, take the time to verify the compatibility of your car and your headunit, and to read the installation information, which may give you specific guidelines.
Here are the various guidelines required in installing an aftermarket car radio. Firstly, put in place the metal frame supplied with your new car radio, this frame has the function of holding your car radio in place on your Opel Vectra, once positioned, make sure to press the locking tabs on each side of the frame. Once this step has been carried out, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Opel Vectra, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just learned how to install a car radio on Opel Vectra, make sure to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t think twice to visit our page dedicated to it.
If you have any further questions about the Opel Vectra, do not hesitate to consult our Opel Vectra category.
