You’re tired of listening to cassettes and only having the capacity to enjoy the radio, while your smart phone is loaded with your favourite music file but you don’t have a 3.5mm or usb port on your car radio, so you can’t enjoy your car journeys to the fullest… That’s precisely why we’ve written this content to help you, because now you’re going to find out how to install a car radio on your Opel Insignia. To accomplish this, initially we will discover how to remove the old car radio, then how to install a car radio on Opel Insignia and at last, how to connect it.
How to install car radio on Opel Insignia: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your Opel Insignia, there is one important step, remove the audio set you currently have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start dismantling, always don’t forget to remove the negative wire from the battery to prevent any risk of short-circuit or electrocution. Once this is carried out, here are the two methods depending on the stereo that equips your Opel Insignia:
- Original car radio:
In cases like this, you’ll have to be persistent, generally speaking, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this procedure will not be enough to remove the old car radio from your Opel Insignia. In fact, you will need to remove certain auto parts of the centre console to access the car radio itself. To do this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections. - Aftermarket radio :
In this circumstance the procedure is easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is carried out, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve completed dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Opel Insignia: Fitting and connecting the car radio
Let’s go to the most important part for you, how to install a car stereo on your Opel Insignia. Ahead of time, take the time to verify the suitability of your car and your headunit, and to read the installation information, which may give you specific instructions.
Here are the various steps involved in installing an aftermarket car radio. First of all, put in place the metal frame provided with your new car radio, this frame has the job of holding your car radio in place on your Opel Insignia, once situated, don’t forget to press the locking tabs on each side of the frame. Once this step has been completed, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Opel Insignia, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just discovered how to install a car radio on Opel Insignia, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.
To get more tips on the Opel Insignia, take a look at the Opel Insignia category.
