You’re tired of listening to cassettes and only having the capability to listent to the radio, while your smartphone is full of your preferred tracks but you don’t have a jack or usb port on your car radio, so you can’t enjoy your car travels to the fullest… That’s precisely why we’ve created this content page to help you, because in this article you’re going to find out how to install a car radio on your Opel Corsa. To do this, first we will find out how to remove the old car radio, then how to install a car radio on Opel Corsa and at last, how to connect it.

install-car-radio-opel-corsa

How to install car radio on Opel Corsa: Removing the old car stereo

Before we start the serious business of how to install a car stereo on your Opel Corsa, there is one necessary step, take away the audio set you already have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start dismantling, always make sure to remove the negative wire from the battery to avoid any risk of short-circuit or electrocution. Once this is carried out, here are the two techniques determined by the stereo that equips your Opel Corsa:

  • Original car radio:
    In cases like this, you’ll have to be persistent, in most cases, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this procedure will not be enough to remove the old car radio from your Opel Corsa. Actually, you will need to remove certain auto parts of the centre console to access the car radio itself. To make this happen, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, make sure to disconnect all the connections.
  • Aftermarket radio :
    In this scenario the technique is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is carried out, make sure to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve concluded dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your Opel Corsa: Fitting and connecting the car radio

Let’s go to the most important section for you, how to install a car stereo on your Opel Corsa. Ahead of time, take some time to check the suitability of your car and your headunit, and to read the installation information, which may give you specific instructions.
Here are the various actions required in installing an aftermarket car radio. Firstly, put in place the metal frame supplied with your new car radio, this frame has the task of holding your car radio in place on your Opel Corsa, once positioned, make sure to press the locking tabs on each side of the frame. Once this step has been accomplished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Opel Corsa, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just learned how to install a car radio on Opel Corsa, make sure to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t think twice to visit our page dedicated to it.

To find more tips on the Opel Corsa, take a look at the Opel Corsa category.