You’re tired of listening to cassettes and only having the capacity to enjoy the radio, while your phone is loaded with your favourite tracks but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car trips to the fullest… That’s precisely why we’ve written and published this content page to help you, because right now you’re going to find out how to install a car radio on your Nissan Xterra. To make this happen, first of all we will see how to remove the old car radio, then how to install a car radio on Nissan Xterra and finally, how to connect it.
How to install car radio on Nissan Xterra: Removing the old car stereo
Before we begin the serious business of how to install a car stereo on your Nissan Xterra, there is one important step, take out the audio set you currently have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start dismantling, always remember to remove the negative cable from the battery to prevent any risk of short-circuit or electrocution. Once this is completed, here are the two methods according to the stereo that equips your Nissan Xterra:
- Original car radio:
In this instance, you’ll have to be patient, in general, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this process will not be enough to remove the old car radio from your Nissan Xterra. In actual fact, you will need to remove certain parts of the centre console to access the car radio itself. To do this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections. - Aftermarket radio :
In this scenario the procedure is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is completed, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve finished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Nissan Xterra: Fitting and connecting the car radio
Let’s go to the most important section for you, how to install a car stereo on your Nissan Xterra. Beforehand, spend some time to examine the compatibility of your car and your headunit, and to read the installation information, which may give you specific instructions.
Here are the various guidelines involved in installing an aftermarket car radio. First of all, put in place the metal frame supplied with your new car radio, this frame has the function of holding your car radio in place on your Nissan Xterra, once positioned, remember to press the locking tabs on each side of the frame. Once this step has been accomplished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Nissan Xterra, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adapt it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Nissan Xterra, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
If you have any additional questions about the Nissan Xterra, do not hesitate to consult our Nissan Xterra category.