You’re bored with listening to cassettes and only being able to enjoy the radio, while your smartphone is full of your favourite music but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car trips to the fullest… That’s exactly why we’ve written and published this content page to help you, because in this article you’re going to find out how to install a car radio on your Nissan Rogue. To accomplish this, first of all we will find out how to remove the old car radio, then how to install a car radio on Nissan Rogue and finally, how to connect it.
How to install car radio on Nissan Rogue: Removing the old car stereo
Before we begin the serious business of how to install a car stereo on your Nissan Rogue, there is one necessary task, take away the audio set you already have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start dismantling, always make sure to remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is carried out, here are the two methods determined by the stereo that equips your Nissan Rogue:
- Original car radio:
In this case, you’ll have to be persistent, most of the time, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this operation will not be enough to remove the old car radio from your Nissan Rogue. In truth, you will need to remove certain auto parts of the centre console to access the car radio itself. To get this done, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, make sure to disconnect all the connections. - Aftermarket radio :
In this situation the procedure is much easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is carried out, make sure to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve finished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Nissan Rogue: Fitting and connecting the car radio
Let’s go to the most important part for you, how to install a car stereo on your Nissan Rogue. Before you start, take the time to examine the suitability of your car and your headunit, and to read the installation recommendations, which may give you specific recommendations.
Here are the various guidelines involved in installing an aftermarket car radio. First of all, put in place the metal frame provided with your new car radio, this frame has the job of holding your car radio in place on your Nissan Rogue, once installed, make sure to press the locking tabs on each side of the frame. Once this step has been accomplished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Nissan Rogue, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just learned how to install a car radio on Nissan Rogue, make sure to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other concerns, or want to learn more about your car, don’t think twice to visit our page dedicated to it.
Whenever you have any further questions about the Nissan Rogue, do not hesitate to consult our Nissan Rogue category.
