You’re bored with listening to cassettes and only having the capacity to enjoy the radio, while your phone is filled with your preferred tracks but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car trips to the fullest… That’s precisely why we’ve written this article content to help you, because now you’re going to find out how to install a car radio on your Nissan Murano. To accomplish this, first of all we will see how to remove the old car radio, then how to install a car radio on Nissan Murano and to finish, how to connect it.
How to install car radio on Nissan Murano: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your Nissan Murano, there is one imperative task, remove the audio set you already have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start taking out, always remember to remove the negative cable from the battery to prevent any risk of short-circuit or electrocution. Once this is completed, here are the two techniques dependent on the stereo that equips your Nissan Murano:
- Original car radio:
In this instance, you’ll have to be persistent, in most cases, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this procedure will not be enough to remove the old car radio from your Nissan Murano. In reality, you will need to remove certain auto parts of the centre console to access the car radio itself. To do this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections. - Aftermarket radio :
In this circumstance the operation is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is completed, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve finished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Nissan Murano: Fitting and connecting the car radio
Let’s go to the essential step for you, how to install a car stereo on your Nissan Murano. Ahead of time, take the time to check the compatibility of your car and your headunit, and to read the installation recommendations, which may give you specific instructions.
Here are the various actions required in installing an aftermarket car radio. First of all, put in place the metal frame supplied with your new car radio, this frame has the job of holding your car radio in place on your Nissan Murano, once installed, remember to press the locking tabs on each side of the frame. Once this step has been done, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Nissan Murano, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adapt it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Nissan Murano, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other concerns, or want to learn more about your car, don’t think twice to visit our page dedicated to it.
To get more tips on the Nissan Murano, take a look at the Nissan Murano category.
