You’re tired of listening to cassettes and only being able to listent to the radio, while your smart phone is full of your favourite tracks but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car travels to the fullest… That’s specifically why we’ve posted this content page to help you, because now you’re going to find out how to install a car radio on your Nissan Leaf. To accomplish this, first we will find out how to remove the old car radio, then how to install a car radio on Nissan Leaf and finally, how to connect it.
How to install car radio on Nissan Leaf: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your Nissan Leaf, there is one essential task, take out the audio set you currently have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start taking out, always make sure to remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is done, here are the two solutions according to the stereo that equips your Nissan Leaf:
- Original car radio:
In this instance, you’ll have to be patient, generally speaking, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this operation will not be enough to remove the old car radio from your Nissan Leaf. Actually, you will need to remove certain auto parts of the centre console to access the car radio itself. To do this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, make sure to disconnect all the connections. - Aftermarket radio :
In this situation the operation is much easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is done, make sure to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve finished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Nissan Leaf: Fitting and connecting the car radio
Let’s go to the essential step for you, how to install a car stereo on your Nissan Leaf. Beforehand, take the time to examine the compatibility of your car and your headunit, and to read the installation recommendations, which may give you specific guidelines.
Here are the various actions involved in installing an aftermarket car radio. To begin with, put in place the metal frame supplied with your new car radio, this frame has the job of holding your car radio in place on your Nissan Leaf, once positioned, make sure to press the locking tabs on each side of the frame. Once this step has been completed, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Nissan Leaf, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Nissan Leaf, make sure to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t think twice to visit our page dedicated to it.
To get more tips on the Nissan Leaf, take a look at the Nissan Leaf category.
