You’re sick and tired of listening to cassettes and only having the ability to listent to the radio, while your smart phone is full of your preferred music file but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car travels to the fullest… That’s exactly why we’ve written and published this content page to help you, because right now you’re going to learn about how to install a car radio on your Nissan Frontier. To do this, first we will find out how to remove the old car radio, then how to install a car radio on Nissan Frontier and at last, how to connect it.
How to install car radio on Nissan Frontier: Removing the old car stereo
Before we begin the serious business of how to install a car stereo on your Nissan Frontier, there is one necessary step, take away the audio set you already have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start dismantling, always don’t forget to remove the negative cable from the battery to prevent any risk of short-circuit or electrocution. Once this is carried out, here are the two solutions dependent on the stereo that equips your Nissan Frontier:
- Original car radio:
In this instance, you’ll have to be patient, generally speaking, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this process will not be enough to remove the old car radio from your Nissan Frontier. In actual fact, you will need to remove certain parts of the centre console to access the car radio itself. To achieve this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections. - Aftermarket radio :
In this circumstance the technique is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is carried out, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve finished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Nissan Frontier: Fitting and connecting the car radio
Let’s go to the essential section for you, how to install a car stereo on your Nissan Frontier. Ahead of time, take the time to verify the suitability of your car and your headunit, and to read the installation instructions, which may give you specific instructions.
Here are the various steps required in installing an aftermarket car radio. Firstly, put in place the metal frame provided with your new car radio, this frame has the task of holding your car radio in place on your Nissan Frontier, once positioned, don’t forget to press the locking tabs on each side of the frame. Once this step has been accomplished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Nissan Frontier, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adapt it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just learned how to install a car radio on Nissan Frontier, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other complications, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.
If you have any further questions about the Nissan Frontier, do not hesitate to consult our Nissan Frontier category.
